PHS-06A Controlador Fotoeléctrico

PHS-06A Controlador Fotoeléctrico
PHS-06A Controlador Fotoeléctrico

INTRODUCTION
PHS-06A Photoelectric Controller With Socket : PHS-06A is designed for automatic light control. It can be used to turn on streetlights at night and turn off at dawn.

Descripción del producto
SAFETY PRECAUTION
Any improper use of this product can cause a short circuit, which can damage product itself or even cause a fire.
Please read instruction carefully and make sure :
  • Wiring and mounting position are correct are according to instruction.
  • Auto lighter must work within rated current and voltage.
TECHNICAL DATA
  • Rated Voltage : 105-305VAC
  • Rated Frequency 50-60Hz
  • Rated Current : 10A
  • Max Load : 1000W, 1800VA
  • Working Environment : 32-122℉ (0℃~50℃
  • Acting time : Turn on in 30 seconds when light level ≦10 Lux
    Turn off in 2 minutes when light level ≧70 Lux
  • Specification :
    Weight : 220g
    Size : 110mm x 90mm x 85mm
INSTALLATION
  • Install with sensor face up to the sky as show in picture.
  • Window on the sensor should not face potential light sources.
  • Connect wires to circuit as following :
    Load : Red wire
    Common : White wire
    Source : Black wire
  • Mount light sensor to supporting structure with metal support.
REMARK
  • PHS-06A (Photoelectric controller with socket)
  • PHS-06A-1 (Photoelectric controller only)
  • PHS-06A-2 (socket only)