Microinterruptor de Mini límite

Microinterruptor de Mini límite
Microinterruptor de Mini límite

INTRODUCTION

  • Contact Resistance : 25mΩ maximum (Initial)
  • Insulation Resistance : 100mΩ minimum (At 500VDC)
  • Dielectric Strength : 1,000VAC 50/60Hz for 1 minute

Descripción del producto
EASY WIRING
  • Loosen cover screws and remove cover.
  • Remove rubber strain relief from switch cover.
  • Slip strain relief over cable.
  • Fasten terminal screws and grounding screw tightly after inserting cables or terminals.
  • Fasten 3 cover screws evenly. Do not over tighten.
  • Recommended Cable - #18/3 STO Flexible.
SPECIFICATIONS
Item NO :
  • AZ8122 (Top Push Rod Plunger) / AZ8112 (Top Push Roller) / AZ8111 (Top Push Roller)
    Operating Force : 900g max
    Release Force : 150g min
    Pretravel : 1.5mm max
    Movement Differential : 0.7mm max
    Overtravel : 4mm min
    Operating Position : 5.5mm min
  • AZ8200 (Coil Spring Rod) / AZ8169 (Spring Wire) / AZ8166 (Plastic Rod)
    Operating Force : 900g max
    Release Force : 150g min
    Pretravel : 30mm max
    Movement Differential : 20mm max
    Overtravel : 20mm min
    Operating Position : 50mm min
  • AZ8108 (Adjustable Length Roller Lever)
    Operating Force : 800-342g max
    Release Force : 50-21g min
    Pretravel : 20°mm max
    Movement Differential : 10°mm max
    Overtravel : 75°mm min
    Operating Position : 95°mm min
  • AZ8107 (Adjustable Rod Lever)
    Operating Force : 800-230g max
    Release Force : 50-12g min
    Pretravel : 20°mm max
    Movement Differential : 10°mm max
    Overtravel : 75°mm min
    Operating Position : 95°mm min
  • AZ8104 (Roller Arm)
    Operating Force : 600g max
    Release Force : 50g min
    Pretravel : 20°mm max
    Movement Differential : 10°mm max
    Overtravel : 75°mm min
    Operating Position : 95°mm min