Non Power Failure 24 Hours Time Switch TB-45

Non Power Failure 24 Hours Time Switch TB-45
Non Power Failure 24 Hours Time Switch TB-45

INTRODUCTION

  • Back up Battery For 100 Hours When Power Failure (just for clock running not for output on/off switching)
  • 15-Minute-Interval, 24 Hours Dial With Built In Time Set Pins.
  • HANDY Ⓛ / I SELECT SWITCH
    Ⓛ : 24H PROGRAM AUTO CONTROL
    I : PERMANENT CONTROL ON

Product Description
SPECIFICATIONS
  • Model No. : TB-45
  • Movement Type : AC Type
  • Rated Voltage : 110-250V
  • Frequency : 45/60Hz
  • Movement : Quartz
  • Back up Power : 100 Hours
  • Resistive Load : 250V AC 16A
  • Lamp Load : 2A
  • Inductive Load : 10A (cosφ=0.7 or more)
  • Motor Load : 4A
  • Minimum Setting Unite : 15 minute units
  • Minimum Setting Interval : 15 minute
  • No. of ON-OFF Operations : 96 operations
CAUTIONS
  • For the first time, please charge battery first for 10 minutes before use.
  • To set correct time, turn the dial in the direction of the arrow and set the present time.
  • Please observe the rated voltage and voltage tolerance of the time switches for adequate use.
  • Do not use the time switch where :
    - there is much dust
    - there is much moisture
    - outdoors or where it will be exposed to rain or water
    - there is much vibration
  • When the time switch is used for loads exceeding the rated capacity, it is imperative that the time switch be used in combination with one or more magnetic contactors according to each load.
  • Mounting methods : BY DIN RAIL (35mm)